Gasket sheet Gambit AF-MF®
General properties and applications:
High-parameter, oil-resistant gasket sheet, thanks to bio-soluble mineral fibres has a higher thermal resistance, especially when working with steam. Highly recommended to applications with water, steam, fuels and oils.
AF-MF® is a registered trademark of Gambit Lubawka Sp. z o.o. or its affiliates.
| Material: |
Gambit AF-MF gasket sheed is based on bio-soluble mineral fi bres, Kevlar® fi bres and fi llers bonded with an NBR - based binder. Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. |
||
| Designation according to DIN 28091-2: | FA-MA1-O | ||
| Approvals/Certificates: | |||
| Maximum working conditions: | |||
| Peak temperature | 0C | 400 | |
| Temperature under continuous operation |
0C | -40 - 340 | |
| Temperature under continuous operation with steam |
0C | 280 | |
| Pressure | MPa | 12 | |
| Dimensions: | |||
|
Standard thicknesses of sheets |
mm | 0,3; 0,5; 0,8; 1,0;1,5; 2,0; 2,5; 3,0;4,0; 5,0 | +/- 0,1 +/- 10% +/- 10% |
|
Standard dimensions of sheets |
mm | 1500x1500 | +/- 10,0 |
| Physical and chemical properties: | |||
| Density +/- 5 % | g/cm3 | 2,0 | DIN 28090-2 |
| Transverse tensile strength min. | MPa | 9 | DIN 52910 |
| Compressibility | % | 5 - 15 | ASTM F36 |
| Elastic recovery - min. | % | 55 | ASTM F36 |
| Residual stresses 50MPa/16h/300ºC/ (min.) | MPa | 29 | DIN 52913 |
|
Residual stresses 50MPa/ 16h/175ºC/ (min.) |
MPa | 34 | DIN 52913 |
| INCREASE IN THICKNESS: | |||
| Oil IRM 903 150oC/5h (max) | % | 6 | ASTM F146 |
| Model fuel B 20oC/5h (max) | % | 6 | ASTM F146 |
| Colour | sand | ||
The values in the table refer to the gasket sheets with a thickness of 2.0 mm.
All information in this catalogue is based on years of experience in manufacture and use of the discussed products. Since sealing performance in the joint is subject to multiple factors such as mounting method, system parameters, and sealed medium, technical parameters specified herein are of informative nature only and cannot be used as grounds for any claims; any special uses of products are subject to consulting with the manufacturer.