GAMPROFILE® Kammprofile gasket

Kammprofile gaskets consists of a acid-resistant steel metal core with concentric-cut grooves with a soft material layer made of graphite gasket sheet or PTFE on both sides. These gaskets are characterized by a very wide range of applications in terms of temperature and pressure of the sealed medium. Highly resistant to blowout, less susceptible to damage caused by assembly errors. They do not damage the flange’s surfaces and are easy to disassemble. 

Working conditions (parameters):
Depending on the type of soft-material layer:
Temperature: -200÷550°C
Pressure: to 25 MPa

Non-standard size gaskets are produced upon request.



A Kammprofile without a centring ring. Applied on flanges with flat pads as well as in male /female and tongue/groove ones. 


A Kammprofile with a static centring ring. The advantage of this solution is the accurate positioning of the seal in the axis of the flanges with the help of centering rings.


A Kammprofile with a dynamic centring ring. The advantage of this solution is the possibility of disassembling the centering ring if necessary or installing a dedicated ring to a different flange class.


Calculating coefficients:

All information in this catalogue is based on years of experience in manufacture and use of the discussed products. Since sealing performance in the joint is subject to multiple factors such as mounting method, system parameters, and sealed medium, technical parameters specified herein are of informative nature only and cannot be used as grounds for any claims; any special uses of products are subject to consulting with the manufacturer.