The most common connections for pipelines and fittings in the industry are flanged-screw connections. They must be sealed with non-metal flat gaskets or semi-metal gaskets.
Gambit manufactures gaskets dedicated to a variety of different flange-screw connection systems and parameters occuring inside the sealed pipelines and machines. The table below shows the six main types of gaskets that come in different configurations.
|Gamseal||Gaskets cut from AF series||According to the sheet parameters|
|Gambitgraf||Gaskets cut from expanded graphite gasket sheets||-200 - 500 oC (max. 550oC in steam); max 12 MPa|
|Gamspir®||Spiral wound gaskets (SWG)||-200 - 500 oC (max. 550oC in steam); max 16 MPa|
|Gamprofile||Kammprofile gaskets||-200 - 500 oC (max. 550oC in steam); max 25 MPa|
|Gamflex||Metal jacketed gaskets with a filler||-200 - 550 oC; max 25 MPa|
|Azmes||Manhole and handhole gaskets||-200 - 550 oC; max 25 MPa|
All types of gaskets are manufactured in accordance with the standards or in accordance with the customer's requirements, i.e. the provided technical documentation. Moreover, we make gaskets on the basis of the provided pattern, using the reverse engineering method.
We produce standard gaskets in accordance with the following normes:
|GAMSEAL & GAMBITGRAF|
|EN 1514-1||DIN 2690||DIN 20040||EN 12560-1||DIN 86072|
|DIN 2691||DIN 86071||ASME B16.21||DIN 2692||DIN 82331|
|ASME B16.20||EN 1514-2||EN 12560-2|
|ASME B16.20||EN 1514-6||EN 12560-6|
|DIN 7603||EN 1514-4||EN 12560-4|
All information in this catalogue is based on years of experience in manufacture and use of the discussed products. Since sealing performance in the joint is subject to multiple factors such as mounting method, system parameters, and sealed medium, technical parameters specified herein are of informative nature only and cannot be used as grounds for any claims; any special uses of products are subject to consulting with the manufacturer.