Gasket Sheet AF-202® type 212

General properties and applications

A popular gasket sheet designed for sealing in low temperature and low pressure applications. Particularly recommended for fuel oil installations.

AF-202® is a registered trademark of Gambit Lubawka Sp. z o.o. or its affifi liates.

 

 

Material:

GAMBIT AF-202 gasket sheet is based on Kevlar® aramide fi bres, mineral fi bres, and fi llers bound with NBR rubberbased binder.

 

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Designation according to DIN 28091-2: FA-AM1-O
Approvals / Certificates: TA Luft (VDI 2200), GOST R, UDT
Maximum working conditions:
Peak temperature 0C 200
Temperature under continuous operation 0C -30 - 180
Temperature under continuous operation with steam 0C 150
Pressure MPa 4
Dimensions:

Standard thicknesses of sheets

/thicknesses above 4.0 mm are produced by gluing/

mm 0,3;0,5; 0,8; 1,0; 1,5; 2,0; 2,5; 3,0; 4,0

+/-  0,1
+/-  10%
+/-  10%

Standard dimensions of sheets

/custom dimensions available within the total range of 1500x3000 mm/

mm

1525x1500

+/- 35
Physical and Chemical Properties:
Density   +/-  5 % g/cm3 2,0 DIN 28090-2
Transverse tensile strength  min. MPa 6 DIN 52910
Compressibility % 9 - 19 ASTM F36
Elastic recovery  - min. % 50 ASTM F36
Residual stresses 50MPa/16h/300ºC/  (min.) % 20 DIN 52913
Residual stresses 50MPa/16h/175ºC/  (min.) MPa 25 DIN 52913
Increase in thickness:
Oil IRM 903 150oC/5h  (max) % 12 ASTM F146
Colour khaki

The values in the table refer to the gasket sheets with a thickness of 2.0 mm.

All information in this catalogue is based on years of experience in manufacture and use of the discussed products. Since sealing performance in the joint is subject to multiple factors such as mounting method, system parameters, and sealed medium, technical parameters specified herein are of informative nature only and cannot be used as grounds for any claims; any special uses of products are subject to consulting with the manufacturer.